Data can be obtained by reading from predefined addresses. The radios generate an ASCII string containing the diagnostic information. The analog or digital tag should be configured with one of the following addresses following the radio id. For example, for RRSSI on radio 1, the address should be “1:RRSSI”.
TEMP Internal radio temperature, measured in degrees C.
VOLT The radio supply voltage.
RRSSI The remote received signal strength, measured in dBm.
LRSSI The local received signal strength, measured in dBm.
FPOW The forward power, measured in Watts.
GRX The number of good data blocks received out of the last 15.
TRX The total number of data blocks detected, up to a maximum o f 15.