5.4 On Your Own

In this section, you will display the compressor as an Image Change graphic whose indicator area changes color according to the value of the tag. The steps you will take to do so will be very similar to those you used in configuring the pump object in section 5.2.

 

Use the Equipment group of graphics to locate "Equip22", which represents a compressor.

 

Place it on the Booster Station application page about 1 inch to the right of the booster tank, and with its base about ¼ inch above the base of the booster tank as shown in Figure 58.

Figure 58

If you need assistance in completing this section, please refer to Solution for 5.4 On Your Own Section.