You will need a digital input tag to indicate the mode of the booster pump (auto or manual).
Because you have already had experience in adding digital input tags to the application, this section is given as an "On Your Own" exercise.
Add the "Booster Pump Mode" digital input tag to the application. As per the Tag Table (see Create a Tag Table), the following information is required:
Name: DI10_2
Area: Tank
Description: Booster Pump Mode
Address: 3
Configure all the necessary properties for the tag, including the correct I/O Device property, and Scan Interval. Do not forget to press the Enter key to set each value in its related field.
If you require help with the completion of this section, please refer to Solution for 8.1 On Your Own Section.