(VTScada) Enables you to set your VTScada applications to operate in simulation mode, as though data is being transmitted and received from Data Flow RTUs.
If set to 0 (default), then the Data Flow simulation mode is turned off.
If set to 1, the Data Flow simulation mode is switched on.
Note: Your system must consist of at least one Data Flow RTU driver tag whose selected I/O device is a serial port tag in order for the simulation to work. If the simulation is working properly, data should appear to be transmitted and received on the Communications Data page.
Note: The DemoMode variable further enables you to enhance the simulation by mocking data as if a fully-configured system with multiple I/O tags is in operation.
Default: DFSimulateOn = 0